|
|
 |
|
|
Anjana
Hr Solutions |
| |
|
|
|
|
EPABX |
| |
|
| |
| |
|
|
|
| |
|
|
DX-2000
Digital ISDN(BRI & PRI) EPABX |
| Technology |
| |
| |
Non-Blocking:
DX-2000 Offers 32bit microprocessor, stored programme
controlled, PCM-TDM, 100% non-blocking switch
with single CODEC per channel. The System has
the capability of duplicated CPU and power supply,
in full hot stand by with automatic changeover.
|
|
VLSI
Design: DX-2000
is based on very large scale integration (VLSI)
which makes design compact, minimizes power requirement
and generates less heat, due to this reliability
and the life of the system increases tremendously.
|
|
Distribute
Process: DX-2000 is based on distributed
processing architecture thereby increases the
processing speed of the system.
|
|
Flash Memory: DX-2000 uses the
high-speed processor D-RAM working memory, Flash-stored
programme memory. The Flash ROM’s makes
future software upgrades easy without replacing
memory chip hardware. The system features are
software controlled and don’t require additional
hardware to allocate feature resources.
|
|
Universal Port Architechure:
All the slots in DX-2000 are connected to PCM
highway. The different functions card can be inserted
to any slot. Hence there is no limitation in offering
different features and configurations.
|
|
Seamless Migration: The system
has the capability to grow and match the pace
of the growing organization. Adding more than
line cards to the existing system can increase
the capacity of system. Hence giving value for
money.
|
|
Power On Maintaince: The system
is so designed the cards/hardwares can be inserted
or removed without effecting the existing working
of the system.
|
|
Distributed Power Supply: Each
card in DX-2000 has its own distributed power
supply which converts primary DC supply to its
required operating and logic voltage. The SMPC
distributed supply offers high efficiency, less
power dissipation and very high reliability.
|
Other
systems so called new technology is still old compared
to creative DX-2000
|
| Networking
and Integration |
| |
DX-2000 has the ability to make PBX a tailor made
product, to cater the needs of the organizations,
where the switching is carried out across multiple
media and multiple products. DX-2000 can be integrated
with other EPABX at different location with analog
two-way trunk (TWT), E&M or digital E-1 trunk.
This feature will give you homogeneous numbering
and call routing capability, thereby saving on
long distance calls for large organizations having
offices at distant locations.
This
digital switch can also function as transit exchange,
thereby providing inter connectivity between exchanges
with complete transparency. This digital switch
also offers you a selection of features that go
beyond the regular networking standards, operating
in proprietary protocol giving you network design
for efficiency, convenience, and operations.
|
|
| Features |
| |
| Caller
ID |
DX-2000 not only supports calling line identification
provided by PSTN but also generates caller
ID on analog extensions. It supports called
on STMF as well as FSK signaling.
|
| Verified
Account Code |
Verified
account code gives the flexibility to user
to utilize the services as per the class
services of the account code from any extensions.
|
| Hot
Key Pad |
The
speaker of the key phone gets activated
automatically, the moment user initiates
the call without pressing the speaker key.
|
| Dual
colour LED |
The
dual colour LED helps the user to identity
the status of the call whether it is initiated
by the same extension or any extension.
|
| Multiple
Nos.& Multiple Time Auto Redial |
DX-2000
can automatically redial multiple telephone
numbers, which may be busy, by pressing
a single key, thereby improving the productivity
of the operator/user.
|
| Multi
level Voice DISA |
It
can be used as an auto attends for all incoming
calls. It plays greeting message and transfers
the call to the desired extension. It provides
different messages at different levels to
inform the caller about the status of this
call e.g. Extension busy, invalid number
dialed or on answer from dialed extension.
|
| Advice
of call charge |
If
you are using Creative KTS then during the
progress of call, the actual value of the
call is displayed on the LCD display. This
helps the user to be conscious of the value
of call while call is progress.
|
|
| Mini
E-Mail |
DX
Series has six standard email message which
can be programmed through simple codes.
This enables the caller to know the status
of the called extension user. This message
would be displaced on the LCD of the caller.
The messages are to be left by the user
like-“Gone for Lunch”,”
Busy in Meeting” etc.
|
|
Message Wait Lamp |
DX
Series support message wait lamp will glow
up as soon as someone leaves a message for
you in your voice mail.
|
| Call
Budgeting |
As
and when the budget for a particular extension
is over the external dialing facility gets
disable automatically. The system even provide
the facility for disconnection of call in
progress the moment call charges exceeds
the budget amount.
|
|
Remote Activation of KTS |
The
speaker phone of the KTS can be activated
by calling extension, with the help of a
single digit code. One can toggle between
the ring & speaker phone to get access
to the extension.
|
| Multi
Party Conference |
It
enables you to setup a conference between
three/eight parties with any combination
of P & T and extension.
|
| VIP
Caller |
The
called extension can identify the VIP Caller
before answering the call by the different
ring generated by the conversation.
|
| Off
Hook Audio Alarm |
The
system offers a unique feature of audio
alarm/Howler Tone if handset is not placed
properly after the conversation.
|
| Extension
Name |
Each
extension can be defined by the name of
the user, which can be displayed on the
LCD screen of the KTS/Operator, enabling
to provide personalized service to the caller/guest
in a hotel.
|
|
|
|
|
